Kelvintech https://www.kelvintech.hu/en/ Thu, 22 Jan 2026 10:35:35 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.kelvintech.hu/wp-content/uploads/2024/02/kelvin_favicon-150x150.png Kelvintech https://www.kelvintech.hu/en/ 32 32 A szigetelés, amit számos éven át nem fog kelleni kidobni https://www.kelvintech.hu/en/2025/11/26/a-szigeteles-amit-nem-kell-soha-tobbe-kidobni/ Wed, 26 Nov 2025 06:29:32 +0000 https://www.kelvintech.hu/?p=1338 A szigetelés, amit számos éven át nem fog kelleni kidobni – Miért a bevarrt ipari matrac a fenntarthatóság jövője? A legtöbb ipari döntéshozónak nem kell magyarázni, mennyibe kerül egy-egykarima, szelep vagy turbinaajtó újraszigetelése.Nem az anyagköltség a drága – hanem a folyamat.A bontás, az újraszerelés, a termelés lassulása, a kiesettmunkaórák. És ami talán a legbosszantóbb: a […]

A A szigetelés, amit számos éven át nem fog kelleni kidobni bejegyzés először Kelvintech-én jelent meg.

]]>

Insulation You Won’t Need to Replace for Years

Why Removable Industrial Insulation Is the Future of Sustainability?

Most industrial decision-makers don’t need an explanation of the cost involved in re-insulating a flange, valve, or turbine access point.
karima, szelep vagy turbinaajtó újraszigetelése.
It’s not the material that’s expensive — it’s the process.
Disassembly, reinstallation, production slowdowns, lost labor hours.
And perhaps most frustrating of all: traditional insulation becomes waste after every single maintenance operation.

The question is no longer how much heat a good insulation solution can save.

The real question is this:

How long is an insulation solution truly viable if it has to be thrown away again and again?

Kelvintech bevarrt szigetelés

Traditional Insulation on Equipment: A Leftover from the “Remove and Replace” Era

Traditional industrial insulation had its place in frequently dismantled, serviced areas — but its time is coming to an end.

Outside of permanent installations, technology has not evolved with these solutions — it has moved beyond them.

A hagyományos szigetelés válogatás nélküli alkalmazásának problémái döntéshozói szemmel:

A technológia nem velük együtt fejlődött, hanem rajtuk túl.

Key decision-maker concerns with the indiscriminate use of traditional insulation:

  • Single-use: damaged during removal, falls apart, becomes waste.
  • Waste-generating: every maintenance cycle produces industrial waste.
  • Costly to reinstall: requires skilled labor and longer downtime.
  • Indefensible from an ESG perspective: no reuse, no secondary material lifecycle.
  • Accumulates hidden costs: losses increase after every intervention.

And this doesn’t even account for the massive heat loss caused by insulation
that’s partially removed and left in place.

This isn’t maintenance — it’s money burning.

Kelvintech bevarrt szigetelés

Removable Industrial Insulation: A New Era in Thermal Protection

Modern removable insulation systems represent a fundamentally different approach.

A technology designed not to be discardedbut reinstalled.

What makes it different?

  • Reusable multiple times — for years.
  • Unaffected by removal: remove, service, reinstall.
  • Position-coded: always returns to its designated location.
  • Robust layered structure: fiberglass, wire mesh, and heat-resistant construction.
  • Does not deform: retains its shape even under extreme temperatures.
  • Durable over time: no crumbling, no wear, no disintegration.

Technically more precise, economically more rational, and vastly superior from a sustainability perspective.

Waste Reduction Where It Truly Matters

In real industrial environments, sustainability isn’t an abstract concept — it’s measured in numbers.

Traditional insulation can generate several tons of waste per year on a larger production line.

In contrast, removable insulation blankets:

  • have a service life of 5–14 years,
  • do not generate ongoing waste,
  • and at end of life, most materials can be recycled.

This isn’t greenwashing for marketing brochures.

This is real, documented waste reduction— clearly reportable in an
ESG statement.

Kelvintech bevarrt szigetelés

ESG: For Decision-Makers, This Is Not an Extra — It’s an Expectation

Sustainability reporting is no longer an appendix — it’s a reputational and
regulatory requirement.

When selecting suppliers, more and more partners are asking:

  • How much waste is generated during maintenance?
  • How can energy consumption be reduced?
  • Is reuse or recycling possible?
  • What is the service life of the insulation?

The Kelvintech removable insulation system provides a strong answer to every one of these questions.

The insulation blanket is not disposablebut — it is reusable.,

It doesn’t generate waste — it extends lifecycle value.

It’s not a compromise — it’s a solution.

That’s why companies like Henkel and Nestlé Purina choose it — because insulation decisions today are no longer just maintenance issues, but ESG performance factors..

30 minutes that decide whether it’s worth moving forward

If you’re looking for clarity, not marketing,
 this 30 minutes is for you.

  • Where is heat escaping today — and with it, your money?
  • When does a reusable insulation blanket system pay for itself?
  • What does this mean in operating costs, downtime, and ESG metrics?
  • make sense to proceed? not éri meg belevágni?

If you’re looking for clarity, not marketing,
 this 30 minutes is for you.

Book a 30-minute online consultation

A short conversation
that helps you decide
where it makes sense to move forward —
and where it doesn’t.

Book an appointment

A A szigetelés, amit számos éven át nem fog kelleni kidobni bejegyzés először Kelvintech-én jelent meg.

]]> „Mit bizonyít 703 paplan? És 913? Mindent.” https://www.kelvintech.hu/en/2025/11/24/mit-bizonyit-703-paplan-es-913-mindent/ Mon, 24 Nov 2025 13:27:45 +0000 https://www.kelvintech.hu/?p=1319 „Mit bizonyít 703 paplan? És 913? Mindent.” Henkel – 703 paplan. 2806 óra gyártás. 562 db szigetelt szerelvény. Hogyan épít bizalmat a Kelvintech a valós projektszámaivalA legtöbb ipari beszállító szeret mutatós mondatokat tenni a prospektusába. „Gyorsak vagyunk.” „Pontosak vagyunk.” „Megbízhatók vagyunk.” Csakhogy a gyárterületen dolgozók pontosan tudják: a mondatok nem szigetelnek. A számok igen.Ezért kommunikálunk projekteket. […]

A „Mit bizonyít 703 paplan? És 913? Mindent.” bejegyzés először Kelvintech-én jelent meg.

]]>

“What does the 703 insulation blanket prove? And the 913? Everything.”

Henkel – 703 blanket. 2,806 production hours. 562 insulated components.

How does Kelvintech build trust through real project data?
Most industrial suppliers like to put reassuring phrases into their brochures:
“Fast.” “Precise.” “Reliable.”

But people working on the production floor know exactly this:
words don’t insulate. Numbers do.
That is why we communicate in projects. Component counts. Production hours. Installation time.

And most importantly: removed and reinstalled positions, where it can be calculated down to the hour how much the client saved by choosing an insulation blanket solution.

Let’s look at two recent examples. Two multinational corporations that clearly have one thing in common: they trust Kelvintech.

Kelvintech bevarrt szigetelés

The Henkel project started with a simple question:

“Can insulation be implemented in a way that allows production to continue in a predictable and controlled manner?”

The answer was not a promise — it was performance.

  • 703 custom — manufactured insulation blankets
  • 2,806 production hours
  • 562 insulated components and linear meters
  • 273 installation hours

A valóságban ez így néz ki: több száz olyan pont a gyártósoron, amely korábban energiát vesztett, ma viszont stabil, kontrollált, érintésvédett.
Ahol korábban minden bontás új szigetelést igényelt volna, ma elég leoldani, majd visszapattintani a helyére.
A Henkel azért tért vissza hozzánk, mert egy dolgot megtapasztalt: ha a paplan illeszkedik, nem csak hőt tart bent – hanem rendet is.

In Henkel’s case, the cost savings achieved with the sewn insulation blankets exceeded expectations several times over already in the first year. Thanks to the applied PTFE-coated fabric and the combined insulation core (ceramic fiber–based insulation), the solution operated at approximately one-tenth of the cost of rigid foam glass insulation, while delivering similarly excellent thermal performance, reliability, and significantly better cost efficiency.

Since installation, repeated dismantling required by test operations would not have been possible without damage using rigid foam glass insulation. Kelvintech’s sewn insulation solutions, however, remain fully intact and in place to this day.

Nestlé Purina – 913 blankets. 1,092 insulated positions. 355 installation hours.


Purina is a true large-scale industrial environment. There are no margins for error here: if a system is down for half a day, it disrupts multiple tons of product, millions in revenue, and the work of hundreds of people.

This is an environment that can only be supported if insulation is not an obstacle, but a partner.

That is where Kelvintech came in.

  • 913 insulation blankets
  • 1,449 production hours
  • 1,092 insulated components
  • 355 installation hours

A Purinánál egy dolog volt a kulcs: a sebesség és a kiszámíthatóság. Mert egy ipari gyár nem állhat meg. Ha szerelni kell, szerelni kell, de utána percre pontosan indulnia kell a termelésnek is.
A bevarrt, pozíciójelölt paplanok itt mutatják meg az igazi értéküket: gyors visszaszerelés, nulla anyagveszteség, nulla késlekedés.
A szigetelés nem egy „szürke háttérmunka” – egy stratégiai cserealkatrész, ami órákban mérhető megtakarítást hoz.

At Nestlé Purina, demand for sewn insulation solutions has grown dramatically over recent years. While in 2019 only 38 components were insulated with sewn blankets, by 2024 this number had increased to
546 components per production hall.

This growth is no coincidence. Sewn insulation has become a standard solution for industrial maintenance across multiple sectors: it ensures the required thermal retention for a wide range of equipment while significantly reducing maintenance time and costs.

Kelvintech bevarrt szigetelés

Why are these numbers important for your next decision?

Because they prove one thing:

Kelvintech doesn’t just work well in theory — it works in real industrial environments.
A company that installs hundreds of insulation blankets every year cannot be inaccurate. It cannot be slow. It cannot be chaotic. No multinational operation would tolerate it.
The reference projects demonstrate three key facts:

1.
Manufacturing capacity

If we can reliably deliver 2,800+ production hours within deadline, the operation is built on solid foundations.

2.
Installation expertise

The 273 and 355 installation hours are not just figures — they represent experience, on-site know-how, and proven industrial practice.

3.
Reliability in live operation

If Henkel and Nestlé Purina entrust us with their critical systems, that trust is a guarantee for you as well.

If you invest, don’t build on promises. Build on delivered projects.

Sewn insulation is not a miracle.

It simply works.

Precisely. Predictably.
Even when every minute counts in a production facility.

  • 703 blankets
  • 913 blankets
  • Hundreds of insulated components
  • Thousands of production and installation hours

This is Kelvintech’s real performance.

And if you choose to, your next project can be one of them.

A „Mit bizonyít 703 paplan? És 913? Mindent.” bejegyzés először Kelvintech-én jelent meg.

]]> Ha már meleg van, legalább tartsa bent – a hőt is, a pénzt is. https://www.kelvintech.hu/en/2025/11/24/ha-mar-meleg-van-legalabb-tartsa-bent-a-hot-is-a-penzt-is/ Mon, 24 Nov 2025 11:51:48 +0000 https://www.kelvintech.hu/?p=1278 Ha már meleg van, legalább tartsa bent – a hőt is, a pénzt is. Van az a pont, amikor az ember végignéz a gyártelepen, és tudja: itt valami szökik. Csak nem tudja, merre. Aztán jön a hőkamera – és kiderül, hogy a szelepeken, karimákon, kazánajtókon, turbinafedeleken keresztül nem csak hő távozik: pénz is. Nap mint […]

A Ha már meleg van, legalább tartsa bent – a hőt is, a pénzt is. bejegyzés először Kelvintech-én jelent meg.

]]>

If it’s already hot, at least keep it inside —
the heat and the money.

There comes a point when you walk through a production facility and you know: something is leaking. You just don’t know where.
Then the thermal camera comes out – and it becomes clear that through valves, pipe bends, boiler doors and turbine covers, it’s not just heat escaping:
it’s money.

Day after day. Night and day. Silently.

The good news? There is an insulation solution that stops this leakage — and pays for itself within a year.
Its name: sewn insulation blankets. And at Kelvintech, we know exactly where they need to be sewn.

We don’t rely on words. We calculate.

A single uninsulated pipe bend can waste 200–300 HUF worth of heat per day. pazarol el.
A shut-off valve? More than double that.

If there are fifty of these in a system — and there usually are —
we’re no longer talking about spare change, but millions of forints in lost energy every year.

Now imagine stopping this loss in a single move.
No boiler replacement. No new piping. No energy performance certificate.
Just a custom-made, position-specific, serial-numbered insulation blanket, equipped with a stainless steel identification plate,
that anyone can remove and reinstall.

No special qualifications required.

Insulation that doesn’t get in the way — it helps.

Traditional insulation is like a brick wall: once you touch it, you have to demolish it.
A sewn insulation blanket, however, is like a jacket.

If maintenance is needed, you take it off.
When the work is done, you put it back on – exactly where it belongs.
All within two minutes.

That’s why it works on virtually any component: heat exchangers, gas and steam turbines, boiler doors, ship scrubber systems, injection molding machines, and other equipment — on pipelines and steam distribution systems alike.

Especially in places where, beyond thermal performance,
maintainability is critical.
And where no one wants to re-insulate sensitive system points every week.
And what matters just as much: no one gets burned because of it.

A pipe with an external surface temperature of  200 °C can, when insulated with a Kelvintech blanket, be cooled down to hand-warm.
Unlike sheet metal cladding, there is no thermal bridge here: the outer surface remains warm to the touch and soft.

Occupational safety compliance?
Safety? Maximum.

Kelvintech bevarrt szigetelés

If it’s already hot, at least keep it inside.
And sustainability is not a cost — it’s an investment.**

A properly insulated turbine or heat exchanger can save several tons of CO₂ emissions every year.

And this is not something you measure in PR reports — you measure it on utility bills.
Kelvintech insulation blankets are not single-use solutions.

They operate for years. They can be removed and reinstalled. And when the time comes, they are recyclable.

This is not just environmentally friendly — it is forward-looking business policy.

Don’t keep the loss inside. Only the heat.

Today, the question is no longer whether insulation is needed.

The question is how it should be done.
With a solution that doesn’t just work well today, but works again and again — at every maintenance cycle.

A solution that operators actually like, because it is simple, logical, and effective.
Kelvintech doesn’t sell miracles.

It delivers insulation blankets that fit exactly where they are needed — precision-designed, custom-made instead of off-the-shelf.

They work exactly as they should.

And they give back exactly what is being lost today:energy, money, time, and safety.
If you haven’t tried it yet, now is the time.

Thermometers and electricity bills don’t lie.

I want to start saving
Free 30-minute consultation
to identify measurable energy and cost savings.

A Ha már meleg van, legalább tartsa bent – a hőt is, a pénzt is. bejegyzés először Kelvintech-én jelent meg.

]]>